CCX3-1 aluminum shell copper busbar
CCX3-1 aluminum shell bus slot is suitable for the power supply and distribution system of AC three phase four wire, three-phase five wire system frequency 50 - 60Hz rated voltage to 690V rated working current 100 - 5000A. As for industrial plants, hospitals, shopping malls, high-rise buildings or the high-tech environment with the low cost high efficiency of power transmission and distribution scheme which enables you to weigh in price when the system is able to implement the efficient distribution.
First, structural characteristics
Small size, high flexibility
Compact "sandwich" structure, which not only saves the occupied space, but also has excellent voltage drop characteristics. A variety of functional units can be used for any angle and height changes, and installed in any building space along the wall and so on.
Two, convenient and quick connection
1 cone insulating plate enhance the mechanical strength of molded case to ensure that pressure and edge tilt.
2 large size bowl manganese steel gasket ensures a uniform pressure contact surface.
3 - the ordinary {19 wrench can be fastened with a red indicator of the double headed single bolt when the indicator mark off naturally, without any testing tools to determine the connection of the connector has been tightened.
4 bolts can be used again in maintenance.
5 joints have + 16mm adjustable.
Three, all aluminum shell
1 bus duct system with light weight, full closed aluminum alloy profile as the shell, the unique structure so that you no longer need to consider the best installation location and any drop.
2 after spraying all aluminum shell can withstand 1000 hours of salt spray test.
3 all aluminum shell has excellent corrosion resistance, heat dissipation and electrical conductivity (50% of the total ground capacity).
High quality conductive and insulating materials
Busbar trunking system using quality tin or silver plated copper, aluminum row as a conductive material, conductive row of outer surface has good corrosion protection.
In order to improve the insulation strength and impact strength of bus bar, the B grade (130 degrees C) is used as a heat forming polyester film insulation material for the whole package.
The ROHS six physical properties testing and UL certification of the environmental protection type insulating material are adopted by the SGS.
The plug-in box structure
The handle box can be installed in the front part of the box body or on the side, set up a more accurate closing indication.
Interlock mechanism is provided for closing error and stop without permission to take power behavior.
The plug-in box set with a fuse fuse pulling specialized tools.
Modularized cover to prevent the fingers unintentionally touched the conductive body.
The inner earth and the outer shell are connected by special contact.
Reversing unit
Type L level three links (LS)
L type vertical bending (LC)
Z type horizontal bending (ZS)
Z type vertical bending (ZC)
Z type horizontal bending (ZS)
T type horizontal bending (TS)
T type vertical bending (TC)